Direct to Film (DTF), by the Square Inch (Quantity Discounts)
Direct to Film (DTF), by the Square Inch (Quantity Discounts)
Direct-to-Film (DTF) heat transfers are perfect for those who have a design, heat press, and shirt ready-to-go. The films will come ready-to-apply.
Use our designer to add one design or build out a gang sheet!
- No Minimum Quantity
- Full CMYK Color Palette
- Fast Turnarounds
- Soft, Matte Finish
- Shipped to you in a roll, ready to cut
- Priced by the Square Inch
- Minimum size of 0.25" x 0.25"
- Maximum size of 21" x 21"
Free ground shipping for orders over $100!
Buy more, save more!
Per Piece Quantities | Price per Square Inch |
0 - 24 | 2.7¢ |
25 - 500 | 2.2¢ |
501 - 999 | 1.7¢ |
1,000+ | 1¢ |
Share
Direct-to-Film Application Tips
-
1. Pre-work
We recommend that you check each film before you begin applying.
-
2. Heat Press Temperature
Set your heat press temperature to 266ºF.
Based on using a Stahls' Hotronix® Fusion IQ® Heat Press.
-
3. Press
Place transfer on your garment with the ink side facing the garment. Close press and apply for 5 seconds.
-
4. Peel
Open your press and remove the film carrier smoothly and evenly.*
-
5. Finishing Press
We recommend a final 2 second finishing press after the film carrier has been removed.
-
Time
5 seconds, plus a 2 second finish
-
Temperature
266ºF
-
Pressure
High 9 (90 psi)
-
Peel
Hot peel*
These recommended time, temperature, and pressure settings are based on our preferred use of Stahls' Hotronix® Fusion IQ® Heat Press, with Poly/Cotton, Cotton, and Polyester garments. Settings on other heat presses may vary. Please test accordingly.
* Some thicker, softer garments may need to peel warm/cool. We’ve noticed this needing to happen with some Bella+Canvas fleece garments.